How to Use your Gun Cleaning Kit

Even after you buy a gun cleaning kit, you need to know how to use it. For anyone, especially a beginner, that can be a daunting task. What they should do, how they should do it, can confuse anyone.

To help you with this, I have created this article. In it, I will share the tips and tricks on how to use your gun cleaning kit. Keep in mind, all the information is on the universal gun cleaning kits. Also, these are applicable to handguns, shotguns, and rifles. On the other hand, ARs do not fall into this category. They are lot more complex to clean.

How to Use your Gun Cleaning Kit:

Now, let us go deeper into it. I will give you step-by-step instructions on the process. Keep reading to find out.

Should You Clean a Brand New Gun:

First of all, the question that arises is should you clean a gun you just bought? The answer is, yes, you should. Even the brand new guns have a lot of greases as well as sticky solvents on them. This is in fact beneficial. They help protect the gun from rust on the days they sit on the shelves of stores.

However, these lubricants are not designed for helping you in the shooting. On the contrary, they will create problems. Therefore, you should always get rid of them prior using the gun on a shooting range.

Always make sure to check your firearm for any piece that is broken, worn out, or damaged otherwise.

Steps to Clean your Gun:

Now, I will show you precise steps for cleaning your gun using the gun cleaning kit.

Washing Hands or Wearing Gloves:

First of all, wash your hands. This is so important because it stops oils and dirt from your hand to enter the interior and exterior of the gun. In addition, you can also wear gloves to stop this from happening.

Also, over years, the cleaning solvents can come in contact with your skin and cause harm. Therefore, it is always useful to wear gloves.

Unloading the Gun:

Next, you need to unload the gun. Always take out all the ammo and keep them someplace distant and safe. If you do not do this, there is a chance of shooting them accidentally. In addition, you could discharge your gun by accident as well.

You should also use a gun cleaning mat. This, in turn, would help to keep the cleaning surface intact without any scars or damages.

Using a Bore Snake:

On the next step, use a bore snake to clean the gun. The bore snake cleans an amount of gunk within a very small amount of time. Therefore, it saves a lot of hassle and works on your part.

Disassembling the Gun:

This step is not an essential for handguns. If you have any other type of firearms, then you need to disassemble it. Always make sure to read the manual and follow the instructions properly. If you do not have one, or if you have lost it in any way, refer to the company website or authentic YouTube videos.

In addition, using a gun cleaning vise is always a great idea. This is especially useful for long guns. They help keep the gun firmly steady.

Using Cleaning Rods and Cleaning Patches:

Cleaning Rods:

Next, use some cleaning rods. Make sure to choose the proper brush size. You should use a bronze brush along with the gun cleaning solvent first.

Pull the brush through for 5-10 minutes, as per your need. However, remember you should always pull and never push the cleaning rods. This will extend the gun barrel life, and, in turn, make your firearm last longer.

Cleaning Patches:

Then cleaning patches come into action. You should check whether the patches are coming out white. If they are black, keep repeating the cleaning process. It can take up to 20 cleaning patches to achieve the desired result.

Removing Solvents:

Use dry cleaning patches along with gun mop attachments to remove the solvents. Once the job is done, you need to lubricate the gun.

Lubricating:

Lubricating your gun does not allow dust to settle on it. As a result, there is much lesser gunk buildup.

Cleaning the Exterior:

On the next step, you need to clean the exterior of the gun. A double-sided wire toothbrush is the best tool for this job. Put some cleaning solvent on the brush and clean areas that need cleaning.

Check for any tiny rust spots. If they are tended properly, they can spread rapidly and cause severe damage to the gun.

Washing off Hands Once More:

Wash your hands once more. Now, Put some oil on them and wipe off any fingerprints that have been left on the gun. Read our guide to buy best gun oil.

Assembling the Gun:

The last step is to reassemble the gun. To do this, rub some lubricant on your hands and put the pieces back together by taking help from the manual.

So, this is everything you need to know about how to use your gun cleaning kit. If you have any more questions in your mind, or if you want me to talk about something else, please do let me know in the comments section below.

Leave a Reply